TECTYL® - 900 - Corrosion Prevention Compound, MIL-PRF-32033

The TECTYL® - 900 Corrosion Prevention Compound is ideal for use as a lubricant in various areas, such as locks, hinges, electric motors, chains, and fishing, hunting, and camping equipment. Developed to protect and lubricate small arms and automatic weapons, TECTYL® - 900 is a versatile product that provides water displacement, water resistance, corrosion protection, and low-temperature performance in all applications.

Approved to MIL-PRF-32033, Qualification number LP-7062.

It is ideal for lubricating small arms and automatic weapons while protecting them from corrosion.
General-purpose lubricant in all applications where water displacement, water resistance, corrosion protection, and/or low-temperature performance is required.
Approved to MIL-PRF-32033, Qualification number LP-7062.

TECTYL 900 is a water-displacing, low-viscosity lubricating oil and corrosion preventive compound. TECTYL 900 is approved to Federal Specification MIL-PRF-32033, QPL Reference Number LP-7062. TECTYL 900 protects ferrous and nonferrous industrial parts during storage and covered transit.

Surface Preparation

The maximum performance of TECTYL 900 can be achieved only when the metal surfaces to be protected are clean, dry, and free of rust, oil, and mill scale. Daubert Chemical Company recommends that the metal substrate temperature be 50-95°F(10-35°C) at the time of product application.

Application

TECTYL 900 is formulated to be used as supplied. Ensure uniform consistency before use. Continued stirring is generally not required. If the product thickens due to cold storage or loss of solvent during use, contact Daubert Chemical Company. DO NOT THIN TECTYL 900. Incorrect thinning will affect film build, dry time, and product performance. Daubert Chemical Company recommends that the ambient and product temperature be 50-95°F(10-35°C) at the time of application. TECTYL 900 can be spray or dip applied.

Removal

TECTYL 900 can be removed with TECTYL HPS solvent-borne thinner, vapor degreasing, hot alkaline wash, or low-pressure steam. TECTYL 900 can be removed from fabrics by normal dry cleaning procedures. Avoid using chlorinated or highly aromatic solvents when removing from painted surfaces, as these solvents may adversely affect paint.

TECTYL® - 437D Corrosion Preventative Compound | MIL-PRF-11796C, Class III

You might also like