Holt International - Grip Aircraft Grade Screw Extractor Friction Drops | EZ59183

Each drop of our Aircraft Grade solution has thousands of hardened aluminum cubes in a non-toxic, food-grade antifreeze carrying agent. These building blocks provide a temporary bridge between the tool and stressed fastener heads for easy screw removal and bolt removal. It has no silicones to hinder sealing/painting operations on metal surfaces. So, no problem with worn screw removal and bolt removal operations while performing aircraft maintenance. Use EZ Grip Friction Drops. This product has met ASTM Tests for aircraft us as listed on our home page.

Stripped Screws

Apply a drop to the screw head or driver's head and wiggle the tool against the screw head while applying moderate pressure to allow the liquid carrier to move the blocks into a bridging position between the tool and any differential surfaces of the damaged screw head. Then apply forward and slightly cocked hard pressure against the screw head and turn the screw out. There is no need to clean EZ Grip from the tool or fastener after use as it will not cause corrosion and does not contain petroleum or silicone.

Rounded Bolts/Nuts

Apply a few drops to the inside of a box end wrench or socket and place over the bolt and wiggle the tool into place allowing the blocks to form a bridge between the wrench/socket and bolt or nut corners. Cock the wrench or socket against the bolt/screw while applying pressure and turn. There is no need to clean EZ Grip from the tool or fastener after use as it will not cause corrosion and does not contain petroleum or silicone

Worn gripping and turning tools

Apply to the head or jaws of the driver, wrench, or pliers to increase gripping power. There is no need to clean EZ Grip from the tool or fastener after use as it will not cause corrosion and does not contain petroleum or silicone.

Extending tool life: Keep a residue of EZ Grip Friction Drops on driver's head, wrench/socket shoulders, and plier jaws to keep these surfaces from coming in contact with the fastener head. Let the blocks take the pressure and not the steel surface of your tool. EZ Grip will not cause corrosion and does not contain petroleum or silicone.

Part Numbers:

Military Part Number : E-Z59183
NSN 6850-01-418-8759

Vibra-Tite - 9071 Copper Anti-Seize, 5gal

You might also like